Diamond wire saw for granite quarrying
The characteristics:
Diamond wires quarrying technique is a revolution for mining stone.
This technique has following advantages in mining:
1: improving the quarrying efficiency,
2: working safely and protect environment well.
3: High performance brings good sized blocks without inner breaks, and can exploit large dimension blocks with low quarry cost.
4: We can provide different support designs and sizes beads according to the stone types
5: We have independently developed the special rubber and vulcanized technique to ensure that the diamond wires can work in all sorts of bad environment.
| Specification(mm) |
Beads/m |
Reinforcement |
Usage |
| Φ11.5 |
40 |
Rubber |
Granite Quarry |
| Φ12 |
37/40 |
Rubber |
Granite Quarry |
| Φ12.5 |
38/40 |
Rubber |
Granite Quarry |
Diamond wire saw for marble quarry
The characteristics:
1: The diamond wire quarrying technique can highly improve the quarrying efficiency, reduce the waste of mining resource,
2: It can exploit large dimension blocks. At the same time, it can be operated safely and it is good for environment protection.
3: Independently developed the special rubber and vulcanized technique to ensure that the diamond wires can work in all sorts of bad environment.
4. The rubber and cable sticking together tightly makes good bonding, and this can be more strikes during the work.
5. The vulcanised rubber easily withstands increases in temperature caused by badly controlled water spraying, which often happens in a quarry.
6. Strong flexibility can reduce the cut-in-one-side problem, and protect cable well when it used for small curvature radius(beginning and end of quarry cuts).
| Specification |
Reinforcement |
Beads number |
Cutting material |
Line speed |
Cutting speed |
Wire life |
| Dia11.5mm |
Rubber |
40/m |
Hard marble |
20-30m/s |
5-10 m2/h |
15-25m2/m |
| Dia 11.0mm |
Rubber |
37/m |
Middle hard marble |
20-35m/s |
10-15 m2/h |
20-35m2/m |
| Dia 10.5mm |
Rubber |
33/m |
Soft marble |
25-35m/s |
15-20 m2/h |
30-50m2/m |
| Dia 11.0mm |
Spring+Plastic |
30/m |
Hard marble |
20-30m/s |
5-10 m2/h |
15-25m2/m |
| Dia 11.0mm |
Spring+Plastic |
30/m |
Middle hard marble |
20-35m/s |
10-15 m2/h |
20-35m2/m |
| Dia 10.5mm |
Spring+Plastic |
28/m |
Soft marble |
25-35m/s |
15-20 m2/h |
30-50m2/m |
The diamond wire saw is used for block squaring:
Product features:
1.The use of diamond wire for stone profilling,with narrow kerf width and high quality cable insure less breakage and good tension,bring beter performance in tough environment.
2. This wire saw works in low noise,safe and eco-friendly.
3. High effection, low cost, low waste
4. Cutting smooth and process accurate
5. Safe and environmental protection.
6. The profile wire saw can process a variety of special-shaped stones, and the cutting angle and orientation can be adjusted arbitrarily.
| Application |
Coating |
Diameter(mm) |
Beads No. |
Hardness |
Wire Speed |
Cutting |
Life |
| Granite squaring |
Plastic |
10.5 |
33 |
Soft |
28-30 |
1.5-3.0 |
15-25 |
| Granite squaring |
Plastic |
11.0 |
37 |
Medium |
23-26 |
1.0-2.5 |
12-15 |
| Granite squaring |
Rubber |
11.5 |
40 |
Hard |
20-25 |
0.5-1.0 |
8-12 |
| Marble squaring |
Plastic |
10.5 |
33 |
Soft |
30-35 |
3-6 |
30-40 |
| Marble squaring |
Plastic |
11.0 |
37 |
Medium |
25-28 |
2-4 |
25-30 |
| Marble squaring |
Rubber |
11.5 |
40 |
Hard |
23-25 |
1-2 |
20-25 |
Diamond wire saw for granite profiling
Diamond profiling wire saw is mainly used for granite block cutting and special-shaped processing. In addition, this kind of wire saw can also be used for processing granite slabs, small blocks, curbstones, tombstones and other stone products. This product is mainly used on cnc wire saws, PLC controlled cutting, and can process arc-shaped stone slabs and cylinders with any pattern. In particular, this wire saw can be used for simple processing of hollow stone plates, as well as for cutting stone plates. It has the characteristics of high processing efficiency and wide cutting surface.
Product features
1.High cutting efficiency.
2.Make the even and smooth slab.
3.Low powder consuming and less raw material wasting.
4.Safe amd eco-friendly with low noise.
5.Easy manipulation with low cost.
| Specification |
Assembing Method |
Beads/meter |
Application |
Line Speed(m/s) |
| Φ9.0 |
Plastic |
37 |
Granite profiling |
20-28 |
| Φ8.8 |
Plastic |
37 |
Granite profiling |
20-28 |
| Φ8.5 |
Plastic |
37 |
Granite profiling |
20-28 |
| Φ8.2 |
Plastic |
37 |
Granite profiling |
20-28 |
| Φ8.0 |
Plastic |
37 |
Granite profiling |
20-28 |
Multi wire saw
Product features:
- Efficiency is measured by down feed per min.
- We can provide endless diamond wire.
- Our 7.3mm endless wires can cut more than 330-380 hours without break! It can help our client reduce the labor cost, eletricity cost and machine maintenance costs.
- Our 7.3mm endless wires are very good for Universo, Gaspari, Pedrini, Pellegrini and Bidese (Breton) multi wire machines.
Product specifications:
| Specification(mm) |
Beads/m |
Reinforcement |
Cutting material |
Line speed (m/s) |
Cutting speed (m2/h) |
Wire life (m2/m) |
| Φ6.4 |
37 |
Plastic |
granite |
20-28 |
0.4-1.8 |
12-30 |
| Φ7.2 |
37 |
Plastic |
granite |
20-28 |
0.4-1.8 |
12-30 |
| Φ7.5 |
37 |
Plastic |
granite |
20-28 |
0.4-1.8 |
12-30 |
| Φ8.0 |
37 |
Plastic |
granite |
20-28 |
0.4-1.8 |
12-30 |
| Φ6.4 |
37 |
Plastic |
marble |
28-35 |
1-4 |
20-80 |
| Φ7.2 |
37 |
Plastic |
marble |
28-35 |
1-4 |
20-80 |
| Φ7.5 |
37 |
Plastic |
marble |
28-35 |
1-4 |
20-80 |
| Φ8.0 |
37 |
Plastic |
marble |
28-35 |
1-4 |
20-80 |
Audited Supplier 
){kind=link}
){kind=link}