12.0mm Bead Rubber Spring Fixed Granite Diamond Wire Saw

• Application: Stone Quarrying
• Type: Rubber + Spring Coating
• MOQ: 50 Meters
• Shipment: TNT; FedEx; UPS; DHL; Sea
• Payment: Tt; Western Union
• Machine: Diamond Wire Saw Machine
• Model NO.: Diamond wire saw
• Market: Vietnam; Brazil; Mexico; Russia
• Transport Package: Carton with Linsing Logo, 50 Meter One Roll
• Specification: 12.0*40, rubber+spring fixed wire saw
• Trademark: Linsing
• Origin: Shangrao, China
• HS Code: 8202991000
• Production Capacity: 500meters/Day

Product Description

Diamond Wire Saw For Granite Quarrying
The advantages of wire saw granite mining:
1 Wide adaptability;
2 High mining efficiency
3 Flexible cutting method
4 Large cutting depth
5 High output
6 Low comprehensive cost
7 Environmental protection and no pollution.

Product features:
1. Fast-cutting speed and long lifespan, low noise, and eco-friendly.
2. Stable quality control for excellent cutting performance, highly cost-effective.
3. Suitable for cutting all kinds of stone.

How to use diamond wire saw for mining:
Quarry&mining is a major project that requires a lot of manpower and material input. For example, roads must be built first. If there is no road near the mine, then even if the stone is extracted, there is no way to transport it out. It just needs water, electricity, no electricity, large machinery can not work, without water, the cutting process cannot be cooled, the stone cannot be cut, and mining is impossible.
After the above basic conditions are met, there are prerequisites for mining. In general, diamond wire saw mining can be divided into four steps, namely, drilling, threading through holes, installing equipment cutting, and adjusting. The following article gives a specific introduction to quarry mining:
The first is drilling. drilling is a key preparatory work. If the hole is not well drilled, it will directly affect the penetration of the diamond wire saw and affect the service life and cutting efficiency of the wire saw. Therefore, the process of punching is particularly important. for cutting a large block, it needs to make three holes, one vertical hole, and two horizontal holes.
Secondly, the diamond wire is threaded and perforated. At present, we mostly use the manual method of threading, fixing one end of the rope with a multi-strand loop cord, passing it in from one hole, and using iron wire to lead out from the other hole. In foreign countries, there is a method of animal threading, like the mouse is tied to a wire and filled with water to allow the mouse to drill out of another hole.
Then install the wire saw machine. because the equipment is heavy, and after cutting a flat surface, the equipment needs to be re-adjusted, so it requires lifting equipment around it, which can be lifted at any time. After the equipment is installed, you can start cutting. Generally, the horizontal cutting is performed first, and then the vertical cutting is performed to prevent the wire saw from idling or jamming the beaded rope after the vertical cutting at the final stage of the horizontal cutting process. Must pay attention to the water supply during the cutting process, otherwise, the large amount of heat generated by the cutting will cause the steel wire to deform, or the rubber will age, and the spring will melt and lose the role of fixing the beads, which will shorten the life of the wire saw.
Adjustment, In the process of mining, the bending angle of the wire saw is constantly shrinking. In the last part, the bending angle of the wire saw is very large, so at this time, we must pay attention to the running state of the wire saw. If there are sparks or the sound of the wire saw cutting is too large, it is best to find a good location and add a flywheel, so as to keep the wire saw from over-bending and causing deformation, thereby shortening the service life.

Product specification for granite:

Diameter(mm)	Bead No(pcs/m)	Reinforcement	Usage
D11.5	37/40	Rubber/Rubber+spring	Granite/quartz quarrying
D12.0	38/40	Rubber/Rubber+spring	Granite/quartz quarrying
D12.5	38/40	Rubber/Rubber+spring	Granite/quartz quarrying
Cutting material	Line   speed	Efficiency	Life
Class1-2	33-35	15-28	25-35
Class3-4	31- 32	8-12	15-25
Class5	28-30	6-10	10-15